EWI - Insulated Render Systems
Choose subcategory or scroll down to see products
CHOOSE MANUFACTURERS
Brand: Ceresit
Model and Size: 1000x500mm - 30m2
Delivery Time: In stock, 1-2 days
10mm Grey Polystyrene (Graphite EPS) for Insulated Render - Ceresit CT315 is a high quality expanded polystyrene board enhanced with integrated graphite within its bead structure. The graphite particles integrated within the insulation beads reflects radiant heat and significantly improves insu..
£39.33
£47.20 inc VAT
Brand: Ceresit
Model and Size: 1000x500mm - 30m2
Delivery Time: In stock, 1-2 days
10mm White Expanded Polystyrene (EPS) for Insulated Render Systems - Ceresit CT305 is a very lightweight and easy to handle and install, expanded polystyrene (EPS) board specially designed to be used as a part of various external wall insulation systems. It can be used in applications requ..
£36.29
£43.55 inc VAT
Brand: Klimas W-M
Model and Size: 67mm - pack of 100
Delivery Time: In stock, 1-2 days
67mm Grey Polystyrene Plugs used to cover the pin shaft, blocking the thermal bridge giving a homogeneous surface in external wall insulation systems using grey polystyrene boards.How the plug should be installed. Shown the standard white polystyrene. The same action with grey polystyrene. ..
£7.33
£8.80 inc VAT
Brand: Kingspan
Model and Size: 1200x400mm - 8.64m2
Delivery Time: 3 - 5 days
20mm Kingspan Kooltherm K5 External Wall Board is a high performance rigid thermoset phenolic insulation core faced on both sides with a glass tissue based facing bonded to the insulation core during manufacture. This phenolic board has high compression strength and has greater water vapour res..
£134.75
£161.70 inc VAT
Brand: Kingspan
Model and Size: 1200x400mm - 5.76m2
Delivery Time: In stock, 1-2 days
30mm Kingspan Kooltherm K5 External Wall Board is a high performance rigid thermoset phenolic insulation core faced on both sides with a glass tissue based facing bonded to the insulation core during manufacture. This phenolic board has high compression strength and has greater water vapour res..
£129.21
£155.05 inc VAT
Guide Price
Brand: Rockwool
Model and Size: 1200mm x 600mm - 2.88m2
Delivery Time: 3 - 7 days
50mm Rockwool Dual Density Slab is a specialised dual density rock wool board that can be used for external wall insulation, where the higher density face of the board can take renders directly, while the lover density inner face can accommodate slight imperfections in the fabric of the building. By..
Guide Price: £40.60
£48.72 inc VAT
Guide Price
Brand: Rockwool
Model and Size: 1000mm x 600mm - 4.8m2
Delivery Time: 1 - 2 weeks
20mm Rockwool Frontrock S is a rigid high density thermal and acoustic insulation slab made from volcanic rock, thus extremely durable, fire resistant and specifically created for external wall applications to go directly under render. Using Frontrock S you can be sure that the facade will be durabl..
Guide Price: £34.50
£41.40 inc VAT
Brand: Rockwool
Model and Size: 1000mm x 600mm - 3.6m2
Delivery Time: 3 - 7 days
50mm Rockwool Frontrock Plus Dual Density External Wall Insulation Slab - 1000mm x 600mm (pack of 6)
50mm Rockwool Frontrock Plus is a rigid dual density thermal and acoustic insulation slab made from volcanic rock, thus extremely durable, fire resistant and specifically created for external wall applications to go directly under render. Using Frontrock Plus you can be sure that the facade wil..
Brand: Kingspan
Model and Size: 1200x600mm - 0.72m2
Delivery Time: Out of Stock
20mm Kingspan Kooltherm K5 External Wall Board is a high performance rigid thermoset phenolic insulation core faced on both sides with a glass tissue based facing bonded to the insulation core during manufacture. This phenolic board has high compression strength and has greater water vapour res..
Brand: Klimas W-M
Model and Size: 70mm - pack of 200
Delivery Time: In stock, 1-2 days
70mm LMX10 is a external wall insulated render board fixing with a metal pin for fixing polystyrene, mineral wool and phenolic external wall insulation (EWI) on all categories of substrates. The head of the zinc coated carbon steel pin is coated with polypropylene and has a low point thermal conduct..
£52.50
£63.00 inc VAT
Brand: Friulsider
Model and Size: 70mm x 10mm
Delivery Time: In stock, 1-2 days
70mm Isofast Insulation Panel Fixings are polypropylene anchors for semi or rigid external wall insulation boards to solid walls. Both the plug and the nail are made from polypropylene, the nail is additionally reinforced with glass fibre. There's no thermal bridging with Isofast Insulation Panel Fi..
£34.52
£41.42 inc VAT
Brand: Wemico
Model and Size: 90602
Delivery Time: In stock, 1-2 days
Aluminium Base Track Profile is a box shaped base profile for 20mm thermal insulation board for thermal insulation systems with render. These profiles can be powder coated to any standard RAL colour...
£7.00
£8.40 inc VAT
Brand: ZVM
Model and Size: 1m x 50m - 50m2
Delivery Time: In stock, 1-2 days
1m x 50m Fiberglass Reinforcing Mesh used for external wall insulation systems, mineral, acrylic, silicone and silicate renders. It is a high tensile strength mesh coated with acrylic acid copolymer liquid, and is water, alkali resistant. It is highly durable and corrosion resistant.CHARACTERISTICSH..
£39.80
£47.76 inc VAT
Brand: Ceresit
Model and Size: 1.1m x 50m - 50m2
Delivery Time: In stock, 1-2 days
Ceresit CT325 Glass-Fibre Mesh is a reinforcing mesh for embedding into external wall mortars that are exposed to higher mechanical loads. Recommended to use in two layers to get the maximum strength. Especially used in Ceresit External Thermal Insulation Composite Systems (ETICS).CHARACTERISTICSHig..
£65.20
£78.24 inc VAT
Brand: Ceresit
Model and Size: 1m x 25m - 25m2
Delivery Time: 2 - 3 Days
Ceresit CT327 Glass-Fibre Mesh is a reinforcing mesh for embedding into external wall mortars that are exposed to higher stress or high mechanical loads. Recommended to use in two layers to get the maximum strength. Especially used in Ceresit External Thermal Insulation Composite Systems (ETICS).&nb..
Brand: ZVM
Model and Size: 2.5m
Delivery Time: In stock, 1-2 days
PVC Corner Bead with fibreglass mesh used for external wall insulation systems, mineral, acrylic, silicone and silicate renders and corners and around recessed windows...
£2.05
£2.46 inc VAT
Brand: Ceresit
Model and Size: 10L
Delivery Time: 5 - 7 days
10L Ceresit CT17 Profi is a deep penetrating primer for priming walls, floors, ceilings inside and outside buildings prior to fixing ceramic tiles, pouring floors, fixing wallpaper, puttying, painting, and fixing thermal insulation boards. It is can be used on aerated concrete, on gypsum s..
£37.53
£45.04 inc VAT
Brand: Ceresit
Model and Size: 5L
Delivery Time: 5 - 7 days
5L Ceresit CT17 Profi is a deep penetrating primer for priming walls, floors, ceilings inside and outside buildings prior to fixing ceramic tiles, pouring floors, fixing wallpaper, puttying, painting, and fixing thermal insulation boards. It is can be used on aerated concrete, on gypsum su..
£21.02
£25.22 inc VAT
Brand: Klimas W-M
Model and Size: 67mm
Delivery Time: In stock, 1-2 days
67mm PVC Disk Cutter is used to cut holes in polystyrene sheets. The end cap can be installed correctly in the hole and cover it to get a homogeneous surface. The tool diameter is 66.7mm, which would give an exact 67mm hole. The cut disk would fit exactly to the hole.CHARACTERISTICSMade from tough p..
£8.88
£10.66 inc VAT
Brand: Ceresit
Model and Size: 25kg
Delivery Time: In stock, 1-2 days
Ceresit ZU Insulation Mesh and Adhesive is used as a base coat render to fix polystyrene boards to external walls. It is a component of following ETICS from Ceresit Ceretherm Premium, Express and Wool Premium. Ceresit ZU is used for fixing of EPS boards and for applying the reinforcing protect..
£14.88
£17.86 inc VAT
Brand: Ceresit
Model and Size: Pallet of 48
Delivery Time: In stock, 1-2 days
Ceresit ZU Insulation Mesh and Adhesive is used as a base coat render to fix polystyrene boards to external walls. It is a component of following ETICS from Ceresit Ceretherm Premium, Express and Wool Premium. Ceresit ZU is used for fixing of EPS boards and for applying the rein..
£624.00
£748.80 inc VAT
Brand: Ceresit
Model and Size: 25
Delivery Time: In stock, 1-2 days
Ceresit ZU White is used to fix using polystyrene boards in external thermal insulation composite systems. It is a component of Ceresit Ceretherm Premium system. Ceresit ZU White is also used for fixing reinforcing protection mesh layer. It is used in new build as well ..
£21.87
£26.24 inc VAT
Brand: Atlas
Model and Size: 25kg
Delivery Time: 7 - 10 days
Traditional Sand And Cement Packed Render Atlas is a ready made traditional cement mortar that can be applied to all mineral substrates that is resistant to water. It is easy to use, has good adhesion and highly durable. This ready made render mortar is consists of Portland cement, quartz aggregate ..
£9.78
£11.74 inc VAT
Brand: Atlas
Model and Size: 1200kg
Delivery Time: 7 - 10 days
Traditional Sand And Cement Packed Render Atlas is a ready made traditional cement mortar that can be applied to all mineral substrates that is resistant to water. It is easy to use, has good adhesion and highly durable. This ready made render mortar is consists of Portland cement, quartz aggregate ..
£497.00
£596.40 inc VAT
Brand: Ceresit
Model and Size: Pallet of 48
Delivery Time: In stock, 1-2 days
Ceresit ZU White is used to fix using polystyrene boards in external thermal insulation composite systems. It is a component of Ceresit Ceretherm Premium system. Ceresit ZU White is also used for fixing reinforcing protection mesh layer. It is used in new build as well ..
£761.60
£913.92 inc VAT
Brand: Ceresit
Model and Size: 25kg
Delivery Time: In stock, 1-2 days
Ceresit CT87 White Adhesive Mortar is a high quality mortar is used for fixing of EPS or mineral wool panels and for applying the reinforcing protection layer to the new builds as well to thermo-renovating existing buildings. Ceresit CT87 White Adhesive Mortar is additionally reinforced with fibres ..
£27.20
£32.64 inc VAT
Brand: Ceresit
Model and Size: 1200kg - Pallet of 48
Delivery Time: In stock, 1-2 days
Ceresit CT87 White Adhesive Mortar is a high quality mortar is used for fixing of EPS or mineral wool panels and for applying the reinforcing protection layer to the new builds as well to thermo-renovating existing buildings.Ceresit CT87 White Adhesive Mortar is additionally reinforced with fibres w..
£950.00
£1,140.00 inc VAT
Brand: Ceresit
Model and Size: 750g
Delivery Time: In stock, 1-2 days
Ceresit CT84 Express is a low expansion polyurethane adhesive for fixing an External Wall Insulation boards -- Phenolic, PIR, Expanded Polystyrene to different surfaces such as wood, OSB boards, bitumens, ceramic bricks, concrete, coated and galvanised sheet plate, dry cellular concrete. Can also be..
£12.71
£15.25 inc VAT
Brand: Ceresit
Model and Size: 25kg
Delivery Time: 7 - 10 days
Ceresit CT83 Strong Fix Adhesive Mortar is a strong adhesive mortar to fix expanded polystyrene boards to external walls. Is a main part of Ceresit external thermal insulation composite systems. It is made from cement and lime mixture with mineral fillers and modifiers. Ceresit CT83 Strong Fix Adhes..
£17.05
£20.46 inc VAT
Guide Price
Brand: Ceresit
Model and Size: 25kg
Delivery Time: 3 - 5 days
Ceresit CT85 Flex is specially created adhesive and base coat for fixing Expanded Polystyrene (EPS) and for applying a thin reinforced layer for external thermal insulation of buildings by means of light wet method. Ceresit Ct85 Flex is an element of ETICS (External Thermal Insulation Composite Syst..
Guide Price: £20.31
£24.37 inc VAT