62mm x 6mm x 6mm Aluminium Mill Finish Bird Beak Facade Joint Profile - length of 2.5m - pack of 20
62mm x 6mm x 6mm Aluminium Mill Finish Bird Beak Facade Joint Profile - length of 2.5m - pack of 20
- Product Code: F993
- Delivery Time: In stock, 1-2 days
- Brand: Wemico
- Model and Size: 62mm x 6mm x 6mm - length of 2.5m - Mil Finish
62mm x 6mm x 6mm Aluminium Mil Finish Bird BeakFacade Joint Profile - length of 2.5m - pack of 20
Length: 2500mm
Width: 62mm
Height: 0.7mm
Pack Quantity: 50
62mm x 6mm x 6mm Aluminium Mil Finish Bird Beak Facade Joint Profile length of 2.5m. This joint profile subtly depicts the joint whilst effectively closing it. The beading along the profile also centres and guides the facade cladding joint. If used horizontally and if no horizontal substructure exists, the profile must be fastened on the rearside of the facade in a sliding manner. Fastening either by means of suitable adhesives or mechanically, depending on the requirements and distances of the vertical substructure. Suitable for 8mm joints.
Article: 9053
Brand: Wemico
Model and Size: R15
Delivery Time: In stock, 1-2 days
15mm PVC Render Stop Bead with 42mm wing used on door and window openings also at base of wall and ceiling level. It is designed to deliver a clean edge, protect and finish plaster and render edges. Colour white...
£41.81
£50.17 inc VAT
Brand: Wemico
Model and Size: 6mm
Delivery Time: In stock, 1-2 days
6mm Expantion Joint Profile with soft PVC centre section for insulation systems, with alkali-resistant glassfibre mesh. Movement: +/-5mm. This profile is recommended for vertical use only...
£109.19
£131.03 inc VAT
Guide Price
Brand: Wemico
Model and Size: 120mm
Delivery Time: In stock, 1-2 days
120mm wide End Cap, manufactured in 1.2mm pre-coated white aluminium can be used with WEC 771, WEC 781, WEC 791 AND IGT range of verge trim profiles. A good quality sealant must be applied to the inside of the profile before sliding the end cap into position. Aluminium rivets should be used to secur..
Guide Price: £5.72
£6.86 inc VAT
Guide Price
Brand: Wemico
Model and Size: 95521
Delivery Time: In stock, 1-2 days
210mm Aluminium Flexible System Starter Track Profile - Slit the back fixing leg where necessary and then bend profile around the curve of the external wall. Insulation thickness: 210mm, Clear width: 213mm...
Guide Price: £33.18
£39.82 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC732 - 200mm
Delivery Time: In stock, 1-2 days
200mm Undersill Profile WEC 732, manufactured from 1.2mm pre-coated white aluminium, in lengths of 2500mm, has an increased drip section to improve visual appearance and a large front face to help prevent water blowing up and soaking the insulation. The new design of drip also allows the end caps to..
Guide Price: £44.49
£53.39 inc VAT
Guide Price
Brand: Wemico
Model and Size: 180mm
Delivery Time: In stock, 1-2 days
180mm wide End Cap, manufactured in 1.2mm pre-coated white aluminium can be used with WEC 771, WEC 781, WEC 791 AND IGT range of verge trim profiles. A good quality sealant must be applied to the inside of the profile before sliding the end cap into position. Aluminium rivets should be used to secur..
Guide Price: £5.72
£6.86 inc VAT
Related Products
Brand: Ceresit
Delivery Time: 9999
Delivery Time: 2 - 3 Days
Ceresit CT136 Dry Dash Receiver is a polymer cement based render suitable for use as a top coat for External Thermal Insulation Composite Systems (ETI..